3M™ Particulate Respirator 1860 , N95

Key Features
• NIOSH approved N95 rating
• Adjustable nose clip
• Nose foam
• Ultrasonically welded headbands

Material Composition

• Straps – Thermoplastic Elastomer
• Nose Clip – Aluminum
• Nose foam – Polyurethane
• Filter – Polypropylene
• Shell – Polyester
• Coverweb – Polyester
• This respirator contains no components
made from natural rubber latex
• Approximate weight of product: 0.35 oz.

Country of Origin

Made in the USA with globally sourced

Use For

• Use for solid particulates and liquid mists
in concentrations not exceeding 10X
• Always follow User Instructions and use
in manners as indicated

Do Not Use For

• DO NOT use for gases and vapors, oil
aerosols, asbestos, arsenic, cadmium,
lead, 4,4-methylene dianiline (MDA), or
abrasive blasting
• DO NOT use for particulate
concentrations exceeding 10X PEL/OEL
• DO NOT use in any manner not indicated
in the User Instructions

Approvals and Standards

• NIOSH approved N95 particulate
• Meets NIOSH 42 CFR 84 N95
requirements for a minimum 95%
filtration efficiency against solid and
liquid aerosols that do not contain oil.
• NIOSH approval number: TC-84A-0007
• Assigned Protection Factor (APF 10) per
US OSHA and Canada CSA

Time Use Limitation

Replace the respirator when it becomes dirty, damaged, or difficult to breathe through.

Shelf Life and Storage

• 5 years from the date of manufacture
• Use By date on box in MM/YYYY format
• Store respirators in the original packaging, away from contaminated areas, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals
• Store in temperatures between -4°F
(-20°C) and +86°F (+30°C) and not
exceeding 80% RH


This respirator helps reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134, including training, fit testing and medical evaluation. In Canada, CSA standard Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and the User Instructions or call 3M PSD Technical Service